In this example, I separated everything by location and created the groups: Apartment, Dahua Office and Optiview Office where each of the devices is located.
H.264 Dvr Player Software That WorksHere you will find a universal CMS DVR software that works with most DVRs.
I will talk about the operation of the H264 CMS software, teach how you should do the setup for DVRs, NVRs, and IP cameras. H.264 Dvr Player Download The SoftwareYou will also have the opportunity to download the software for free. H.264 Dvr Player Manual Or MonitoringThe universal CMS DVR software is used for monitoring mixed brands of DVRs, its usually used by people who have H.264 network DVRs, There are many DVRs manufactured in China that do not have a brand and often do not even have manual or monitoring software, thats the reason why people start looking for alternative software for non-branded DVRs such as a universal CMS DVR software. In this case, it is necessary to configure it using internal IP. The DVR must be installed with the security cameras and connected to the router and to the computer with the universal CMS DVR software. In this diagram, I am using as an example an OEM DVR from Hikvision with TVI technology. Make sure that your system is connected as shown in the diagram and check if the images are appearing on the local monitor before continuing. See in the example below the network configuration for the Hikvision DVR, the IP is 192.168.2.135 the computer is using IP 192.168.2.192 and therefore they are within the same range of network IPs (192.168.1.1 to 192.168.2.254) Make sure that DVR is using the correct IP within your network, it doesnt matter if you are using another brand such as Dahua, Swann, etc. Obviously, for your particular case, the IPs will be different from the example above, the important thing is that DVR and computer are configured in the same IP network range. Note that different brands of DVR can bring other nomenclatures, the important thing is to find the correct port for the application. Just write down the ports your DVR is using, just in case you need the information later to configure remote viewing. Check the local viewing before proceeding Before setup, the DVR for the H264 CMS viewing it is important to make sure everything is working properly between the DVR and the computer. Use a web browser to check if the local viewing is working fine. By viewing the DVR images using the browser, you are making sure that the IP configuration is correct and the network is working before the installation and configuration of the H264 CMS. This step is pretty important. Just click the link below: Click to download Remember again that it is not easy to find this universal CMS DVR software available in the latest version, so do not forget to share the information with friends. At the end of the installation process choose the language you prefer to use. See the images below (click to enlarge) Choose English and click Next Click Next Click Next Click Next Click Next Choose the language and click OK. You can click on these icons and drag them to the center of the screen to view the images. At the center, the software shows all the cameras, at the bottom, there is a toolbar with log information such as date, channels, cameras, and users. The right side menu shows the date, time, CPU usage, PTZ control and a menu for settings, configuration.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |